Bhushan BWG34 Color Coated Steel Sheet
Bhushan BWG34 PPGI sheets, where “Bhushan” refers to the specification source, “BWG34” denotes the thickness, and “PPGI” refers to the raw material. Bhushan BWG34 PPGI corrugated sheets are very popular in Africa and are widely used in roofing and walling projects because they are lightweight, affordable, available in a full range of colors, and quick to install.
Ensure product quality and transportation
Product Specifications
| Product Name | Bhushan BWG34 Pre-painted Galvanized Steel Sheet |
| Grade | DX51D+Z / SGCC / S280GD (others on request) |
| Thickness | 0.17–0.30 mm; |
| Width | 600–1250 mm |
| Length | 1–6 m cut length, or full coil |
| Type | Flat sheet & Corrugated sheet |
| Zinc coating | Z30–Z275 (both sides) |
| Paint | Primer 5–8 μm, top 15–25 μm, back 5–10 μm |
| Paint system | PE / SMP / HDP / PVDF |
| Colour | RAL range; brick red, sea blue, dark green, off-white, wine red, silver grey as regulars |
| Gloss | 30–60 GU; matt 10–25 GU available |
| Tolerance | Thickness ±0.02 mm, width ±2 mm |
| Standards | ASTM, EN, JIS, GB/T |
| Packing | Standard export packaging |


Coverage Area per 1 ton of Bhushan BWG34 PPGI Sheets
| Thickness | Weight per square meter | Area covered by one ton |
| 0.18 mm | Approximately 1.41 kg/m² | Approximately 707 m²/t |
| 0.20 mm | Approximately 1.57 kg/m² | Approximately 637 m²/t |
| 0.25 mm | Approximately 1.96 kg/m² | Approximately 510 m²/t |
Note: This product is not suitable for the following installation scenarios: large-span roofs without closely spaced purlins; areas prone to severe typhoons; and permanent roofing for industrial buildings in highly corrosive coastal environments. For these three scenarios, the thickness must be increased to 0.25 mm or greater.
Production Process of Sheet Metal
First, PPGI rolls are produced, then PPGI flat sheets of the required dimensions are cut using a cutting machine, and finally, they are pressed into corrugated sheets using a forming machine.
Roll material is cut into Bhushan BWG34 PPGI flat sheets.
Bhushan BWG34 PPGI corrugated sheets are then pressed using a forming machine.
Applications
Bhushan BWG34 PPGI steel sheets are very popular in the African and Southeast Asian markets. They can be used for roofing, wall cladding, ceilings, door panels, fencing, and temporary structures. The eight most common applications are:
- Pitched roofs for residential homes and self-built houses.
- Roofs for factories and warehouses.
- Wall cladding, building envelopes, and renovation of existing walls.
- Ceilings and interior partitions.
- Door panels, roll-up doors, shelving units, and side panels for home appliances.
- Temporary structures, construction site fencing, and modular units.
- Animal housing, exterior cladding for grain silos, and greenhouse enclosures.
- Billboards, awnings, and carports.


Inquiries Welcome
Please confirm the following five items before inquiring: intended use, actual thickness, required effective width of corrugated sheet, color code, quantity, and port of destination.


- Lead time: Trial order 7–10 days, 50–200 tons 20–28 days, custom colors will require an additional few days. See capacity and lead time for detailed figures.
- Packaging: 20ft container approximately 20–24 tons, 40ft high cube container approximately 25–28 tons.
- Documents: Invoice, packing list, bill of lading, quality inspection report, MTC.
- Colors are selected according to the RAL color chart; testing items and reports are available from the quality inspection center.
- packaging methods are as per export packaging guidelines.







