Product & Factory Resource Library
From basic hot and cold rolled steel, and corrosion-resistant galvanized/aluminized zinc steel, to high-value-added color-coated, printed, and VCM steel, as well as various profiles, strips, and pipes, we offer a full range of steel products covering construction, home appliances, and industrial manufacturing, and support customized processing and export packaging.
ppgi – Prepainted galvanized coil
The substrate surface is coated with a zinc layer and a paint coating, providing excellent corrosion resistance and decorative properties. It is commonly used in the production of appliance panels and roofing panels.
| Thickness | 0.1 – 1.20 mm |
| Width | 50–1,250 mm |
| Base Coating | Z30–Z275 g/m² |
| Top / Back | 11–35 µm / 5–14 µm |
| Paint System | PE · SMP · HDP · PVDF |
| Coil Id | 508 / 610 mm |
| Coil Weight | 3–8 t |
| Colour | Ral Card Or Your Sample |
| Impact | 9J |
| Pencil | 3H |
| T-Bend | 3T |
| Mek | >100 |
| Salt Spray | ≥500 h |
| Gloss | 30-70 |
PPGl – Prepainted galvalume coil
The substrate surface has an aluminum-zinc coating, which provides stronger corrosion resistance and high-temperature resistance compared to PPGI steel coils, making it suitable for coastal applications, industrial applications, and other high-temperature environments.
| Thickness | 0.12 – 1.20 mm |
| Width | 600–1,250 mm |
| Base Coating | AZ30–AZ275 g/m² |
| Temper | Full hard · half hard · soft |
| Paint System | PE · SMP · HDP · PVDF |
| Paint Coating Thickness | Top: 11-35 um; Back: 5-14 um |
| Paint Surface | Matt / Wrinkled / Glossy / Emboss |
| Color | As per RAL Color，can be customized |
| Coil ID | 508 / 610 mm |
| Coil Weight | 3 – 8 t (Roll weight can be customized) |
| Surface | Chromated · oiled · dry · anti-finger |
| MOQ | 10 t |
ppAL : Color aluminum coils
The substrate is lightweight, has excellent corrosion resistance, and will not rust at the cut edges; the paint coating is available in PE/PVDF, with a very long service life, and is often used in high-end applications.
| Material Grade | 1064 / 1100 / 3003 / 3004 / 5052… |
| Thickness | 0.18–1.50 mm |
| Width | 300mm/400mm/500mm/575mm/595/600mm/1000mm/1200mm |
| Paint System | PE · PVDF |
| Paint Thickness | 5 µm + 15 µm /12 µm Or just one side paintingas customized request |
| Coil Id | 405 / 505 / 508 mm |
| Coil Weight | 1–5 t |
| Density | 2.7 g/cm³, against 7.85 for steel |
| Colour | RAL card or your sample |
| MOQ | 5 t |
| Application | Ceilings, facades, signage, roller shutters, transport vehicles, etc. |
vcm
| Substrate Thickness | 0.3mm – 1.2mm |
| Width | 600-1250mm (1000mm, 1219mm (48-inch), 1250mm, etc.) |
| Film Thickness | 25μm – 200μm |
| Film Type | PET, PVC, PETG |
| Substrate | Cold-rolled carbon steel (SPCC, SGCC), GI coil (DX5ID, DX52D, DX53D), aluminum alloy (5052, 6061), stainless steel (304, 316L, 201) |
| Surface Protective Film | PE Film |
| Metal Coil Inner Diameter | 508mm or 610mm |
| Roll Weight | 3 – 8 t |
| Film Colors | Various RAL Colors |
| Film Textures | Wood Grain, Brushed Grain, Marble Grain, Matte, Glossy, Various Metallic Colors |
| MOQ | 25 tons |
Printed steel coils
The production line utilizes advanced equipment such as a fully automated ABB electronic control system. It uses cold-rolled or hot-dip galvanized steel coils as raw materials, and patterns include wood grain, brick and stone textures, marble patterns, and floral patterns for interior decorative panels. Custom patterns are also supported.
| Thickness | 0.18–1.00 mm |
| Width | 600–1,250 mm |
| Base | Hot galvanized coil · cold rolled coil |
| Pattern | Wood grain, brick, stone, floral, traffic patterns, camouflage or customized |
| Standard | EN, GB, JIS, ASTM |
| Coil Id | 508 / 610 mm |
| Repeat | Along the coil length, stated on order |
| MOQ | 10 t |
| Application | Doors, ceilings, partitions, elevator cars, furniture, home appliances |
Galvanized steel coil sheet
| Thickness | 0.12–6.0 mm |
| Width | 25–1,500 mm |
| Length | ≤6000 mm |
| Zinc Weight | Z30–Z275 g/m² |
| Product Types | Rolls, Sheets, Strips |
| Spangle | Regular · minimized · big · zero |
| Surface | Chromated · oiled · dry · unoiled |
| Coil Id | 508 / 610 mm |
| Coil Weight | 2–10 t |
| Grades | SGCC · DX51D · SGCH · CS type A/B/C, etc |
| Standards | GB/T 2518 · EN 10346 · JIS G3302 · ASTM A653 |
| MOQ | 10 t |
| Applications | Waterproofing membranes, ductwork, purlins, color-coated steel sheet substrates, etc. |
galvalume/aluzinc steel coil sheet
| Thickness | 0.12 – 3.0mm |
| Width | 25 – 1,250 mm |
| Coating | AZ30 – AZ275 g/m² |
| Temper | Full hard · half hard · soft |
| Surface | Chromated · oiled · dry · anti-finger |
| Coil Id | 508 / 610 mm |
| Coil Weight | 2–10 t |
| Grades | DX51D+AZ · SGCC · SGLCC… |
| Standards | GB/T 2518 · EN 10346 · JIS G3302 · ASTM A792 |
| MOQ | 10 t |
Metal Profiled Sheets/Roofing Panels
| Thickness | 0.10 – 0.80 mm |
| Effective Width | 665–1,100 mm, 60+ profiles |
| Substrate | PPGI · PPGL · GI · GL |
| Sheet Length | Cut to order(≤12m), +50 mm end lap |
| Rib Depth | From 12 mm to 50 mm by profile |
| Corrugated Types | Trapezoidal, wavy, etc. |
| Accessories | Screws · washers · ridge · gutter · flashing |
| Bundle | 20–30 sheets, 0.5–1.2 t |
| Material | A653, A653M, DX51D, DX52D, DX53D, Q235, Q345, SPCC, SGCC… |
| Standards | GB/T 12755 · EN 508 · ASTM A924 |
| MOQ | 10 t |
Hot rolled coil & plate
| Thickness | 1.5–50 mm |
| Width | 360–1,650 mm |
| Finish | Black · pickled and oiled |
| Pattern | Plain · checkered / tear plate |
| Grades | Q235B · Q345B · SS400 · ST37-2 · S235JR · A36 |
| Form | Coil · sheet · cut plate |
| Standards | ISO/JIS/GB/ASTM/DIN |
| MOQ | 25 t |
Cold rolled coil & sheet
| Thickness | 0.12–6.00 mm |
| Width | 600–1,500 mm |
| Surface | Matte · bright · controlled roughness |
| Hardness | Soft · half hard · full hard |
| Grades | SPCC · SPCD · DC01 · DC03 · ST12 |
| Coil Id | 508 / 610 mm |
| Coil Weight | 3–15 t |
| Standards | GB/T 708 · EN 10130 · JIS G3141 |
| MOQ | 25 t |
Steel pipe
| SSAW SPIRAL | OD 168–3,020 mm · WT 5.0–22 mm |
| SEAMLESS | OD 8–1,240 mm · SCH 5s to XXS |
| PRE-GALVANIZED | OD 1/8″–8″ (10–219 mm) · WT 0.4–5.0 mm |
| HOT-DIP GALV. | OD 1/2″–24″ (20–610 mm) · WT 0.4–25.0 mm |
| Ends | Plain · bevelled · threaded · grooved |
| Grades | 10# · 20# · 16Mn · Q345 · ASTM A53/A106 |
| Standards | API 5L · ASTM · JIS · DIN · EN · GB |
| MOQ | 10 t |
Section steel
| ANGLE | 20×20–250×250 · unequal 25×16–200×125 |
| FLAT BAR | 4–60 mm × 12–300 mm |
| H BEAM | 100×100 to 500×500 (HW series) |
| I BEAM | 10# to 63# |
| T BAR | 50×100×6×8 to 200×400×13×21 |
| C CHANNEL | 80×40×20×2.5 to 300×80×20×3.0 |
| Z CHANNEL | 100×40×20×2.0 to 300×85×25×4.0 |
| SQUARE / ROUND | 5×5–100×100 · Ø5.5–250 |
| WIRE ROD / REBAR | Ø5.5–16 · Ø6–45 (HRB400E, HRB500E) |
| GRADES | Q235 · Q345 · SS400 · ST37-2 · S235JR · S355JR |
| STANDARDS | GB · JIS · DIN · EN · ASTM · AS/NZS · BS |
| MOQ | 10 t |