Home » Products » Roofing Sheet » Bhushan BWG34 Galvanized Corrugated Sheet

Bhushan BWG34 Galvanized Corrugated Sheet

In “Bhushan BWG34,” ‘BWG’ stands for Birmingham Wire Gauge, and “34” corresponds to a nominal thickness of approximately 0.234 mm. The raw material for Bhushan BWG34 galvanized corrugated steel sheets is galvanized steel coil. The coil is uncoiled and cut to size, then rolled through a forming machine to create continuous corrugations.

Ensure product quality and transportation

    The finished product is delivered in “sheets,” with lengths cut to project specifications. It can be installed immediately upon arrival at the site without requiring secondary processing. Sheets from the same batch can be used for roofing, as well as for walls, canopies, and fencing. Product details are shown in the video below.

    Supply Specifications

    Product Name GI Corrugated Roofing Sheet
    Thickness BWG34 (customizable to 0.14–0.80 mm)
    Zinc Coating Weight Z30–Z275 g/m²
    Front Width of Forming Plate 762 / 800 / 914 / 1000 mm, other widths available (600–1250 mm)
    Reference Effective Coverage Width Approx. 686 / 724 / 838 / 924 mm, nominal width minus one wave pitch
    Length 1.8–6.0 m standard length; recommended single piece not exceeding 5.8 m for full container shipping
    Tensile Strength Approx. 270–550 MPa, depending on substrate grade
    Surface Treatment Standard spangle or zero spangle, passivated and oiled available
    Substrate Hot-dip galvanized steel coil
    Grade DX51D+Z / SGCC / SGCH, etc.
    Standard ASTM A653, EN 10346, JIS G3302, GB/T 2518
    Packaging Sheet metal corner protectors + waterproof paper, wooden pallets or as per customer requirements
    MOQ 10 TONS
    Length measurement
    Length measurement
    Surface details
    Surface details

    Production Process

    1. Uncoiling and Shearing: Whole coils of galvanized steel are fed into the uncoiler, longitudinally slitted to the specified sheet width, and then transversely cut to length to produce flat sheets.
    2. Profiling: The flat sheets enter the cold-forming profiling line, where they are gradually formed into corrugated profiles through multiple sets of rollers to prevent the zinc coating from cracking during a single forming operation.
    3. Cutting to Length and Trimming: The sheets are cut to the ordered length, the ends are trimmed flush, and after trimming the leading and trailing edges, they proceed to the next process.
    4. Stacking and Packaging: The sheets are sorted into stacks, counted, and labeled; corner protectors and waterproof paper are added before they are bundled and stored in the warehouse.

    Note: The entire process involves cold-forming without heating, and the substrate’s microstructure remains unchanged. The weight and mechanical properties of the zinc coating remain consistent before and after forming.;

    Packaging and Container Loading

    Each bundle weighs 2–3 metric tons, secured with strapping bands and metal corner protectors, and wrapped in waterproof paper; for ocean freight, wooden pallets or moisture-proof paper lining inside the container are used by default. A standard 20-foot container holds approximately 25 metric tons; actual capacity is determined based on panel length and packing method. For individual panels longer than 5.8 meters, a 40-foot container must be used for transport. For more information on packaging and container loading, please visit this page.

    Preparing to pack
    Preparing to pack
    Packaging complete and ready for shipment
    Packaging complete and ready for shipment

    Applications

    • Industrial Plants and Warehouses: Roofing and wall cladding—the standard choice for large-scale applications.
    • Agricultural Buildings: Livestock and poultry sheds, grain storage sheds, and exterior cladding for greenhouse frames—low-cost and quick to replace.
    • Temporary Construction Sites: Portable prefab buildings, material sheds, and construction fencing.
    • Commercial and Residential: Market stalls, carports, awnings, and roof renovations for existing structures.
    • Target Markets: Roof systems in regions such as Africa and Southeast Asia that primarily use galvanized steel sheets; specifications are compatible with local practices.
    Bhushan Bwg34 galvanized flat sheet
    Bhushan Bwg34 galvanized flat sheet

    Length measurement
    Length measurement

    Contact Us for Quotes

    Wanzhi Steel has over 15 years of experience in production and export, specializing in metal-coated steel products. We supply GI steel, GL steel, and color-coated steel, including coils, flat sheets, and corrugated sheets.

    Our Bhushan BWG34 GI corrugated steel sheet is of superior quality. With years of production experience, we provide customers with cost-effective products, helping them procure satisfactory items. Please inform us of the quantity and type of Bhushan BWG34 steel you require, and we will provide you with a quote shortly.

    Whatsapp: +8615138685087

    Email: info02@wanzhisteel.com