Export verpakkingen
Export Packaging Designed for Long-haul Sea Freight
Rolls, sheets, and strips are packaged separately, with layers treated for moisture protection, rust prevention, impact protection, and deformation prevention; each item is clearly labeled for easy arrival counting, quality inspection verification, and warehouse management.
General Packaging Protection Levels
Whether for rolls, sheets, or strips, export packaging is processed layer by layer in the following order: first, to isolate moisture; second, to reinforce protection; and finally, to secure identification.
Anti-rust Paper Lining
The product is wrapped in anti-rust paper both inside and out to block moisture and dust and prevent direct contact between the surface and the packaging materials.
Anti-rust Film Wrapping
The product is covered with a plastic anti-rust film to provide a moisture-tight seal, withstand temperature fluctuations and humid conditions during ocean transport.
Corner and Edge Protection
Corner protection strips are installed at the corners to protect the end faces and sides and prevent deformation due to collisions and impacts during loading and unloading.
Protective Plates and Strapping
Steel protective plates are attached to the exterior and secured with steel straps or packaging straps to prevent the package from loosening or rolling during transport.
Etikettering en markering
Product labels are affixed to the outer packaging, indicating the product name, specifications, weight, lot number, and grade, and are shipped with the goods.
.
Spoelverpakking
Coils are classified into two types based on storage orientation: vertical and horizontal. The choice depends on the coil weight, inner diameter, and container loading conditions. Both types are shipped after being wrapped with rust-proofing material, protected with guard plates, and secured with steel straps.
Vertical Coil Packaging
The coils are positioned vertically on wooden pallets, with the core supported and secured, and moisture-proof barriers applied to the bottom and ends. This facilitates vertical loading and unloading with forklifts and is suitable for steel coils with large inner diameters that remain stable when stood upright.
Horizontal Coil Packaging
The coils are placed horizontally, with steel protective plates and rings installed on the ends. They are secured with steel straps wrapped around them horizontally to prevent rolling and end-to-end collisions during transport; this is the most common method for packing coils into shipping containers.
Verpakking van stalen spoel
Wrap the interior and exterior with rust-proof paper → Cover with plastic rust-proof film → Apply paper corner and edge protectors → Install steel protective plates → Secure with steel strapping → Packaging complete and ready for shipment.
Stalen strip verpakking
First, secure the core of the coil with an inner liner, then wrap it with rust-proof film and corner protectors. After installing protective plates on the ends, secure the entire coil with steel strapping to ensure it does not come loose during lifting and transportation.
Plaatverpakking
Sheet packaging is divided into two categories: flat sheets and corrugated sheets. The number of packaging layers is similar to that of steel coils.
Process Flow
Rust-proof paper wrapping → Plastic rust-proof film covering → Steel guard plate edge protection → Frame and packing strap fixing → Secure binding → Packaging complete and ready for shipment.
- Quantitative Bundling: Bundled according to the order’s required weight and number of sheets for easy inventory counting and distribution upon arrival.
- Maatwerk: Bundle weight, number of strapping layers, and pallet type can be negotiated and determined based on destination transportation conditions.
Container laden
Before loading, cargo is calculated according to specifications, gross weight, and destination. The cargo is neatly arranged and reinforced inside the container to prevent shifting or tipping during sea transport.
Key Points for Container Loading and Reinforcement
Etiket
A product label must be affixed to the exterior of each export package, indicating the product’s identification, specifications, weight, and quality inspection information. The following example uses the packaging label for Galvalume steel coils; the meanings of each field are as follows.
| Labelartikel | Engelse etikettering | Voorbeeld inhoud |
| Naam | PRODUCT | Galvalume stalen spoel |
| 规格 (mm) | SIZE | 0.41 × 1220 |
| 净重 (kg) | NETTO GEWICHT | 3611 |
| 毛重 (kg) | BRUTO GEWICHT | 3621 |
| 参考长度 (m) | LENGTH | 916 |
| 产品编号 | Product Code | 2 |
| 生产日期 | DATUM | 46285 |
| 产品号 | PRODUCT NEE. | DSYZ20260919020C |
| 等级 | GRADE | EERSTE LEERJAAR |
| 检验员 | INSPECTEUR | WZ05 |