ပင်မစာမျက်နှာ » သတင်း - HUASHIL » စက်မှုဒိုင်းနမစ် » Guide to Selecting Steel Coils for Writing Boards for Russian Customers

Guide to Selecting Steel Coils for Writing Boards for Russian Customers

For our Russian customers, a writing board steel coil is not just an ordinary color-coated steel sheet; it must simultaneously meet three requirements on a single coil of material: the surface must remain flat after cutting and framing; it must allow for smooth writing and easy erasure; and the protective film must withstand several dozen days of ocean transport as well as loading and unloading at temperatures in the low -20s.

Dear Russian customers, regarding your procurement of whiteboard steel coils—how to select the substrate, paint, and protective film; what thickness the substrate should be; what coating system and thickness to choose; and what grade of protective film to use—this article will provide all the answers.

အစိမ်းရောင် Chalkboard သံမဏိကွိုင်ထုတ်လုပ်မှု
အစိမ်းရောင် Chalkboard သံမဏိကွိုင်ထုတ်လုပ်မှု
ထုတ်လုပ်ထားသော အနက်ရောင်သံမဏိကွိုင်များ
ထုတ်လုပ်ထားသော အနက်ရောင်သံမဏိကွိုင်များ

Substrate ရွေးချယ်မှု

How to Choose Substrate Thickness

Since whiteboards are hung on walls or mounted on mobile stands and are subject to almost no stress themselves, it’s easy to conclude that “increasing the thickness only adds to the cost.” In reality, thickness addresses another issue with whiteboards: panel shape. When thin panels are cut into 1200×2400 strips and framed, the edges tend to warp and the diagonals tend to curl; when viewed directly against the light, this appears as a layer of ripples. This defect cannot be flattened by framing alone. The larger the panel size, the thicker the material should be selected.

Substrate ThicknessTypical Board Sizesဘာကြောင့် ဒီတန်းကို ရွေးတာလဲ။
0.15-0.18mmSmall sizes up to 600×900 mm, children’s boards, portable boardsLowest cost, lighter cutting, cheaper transportation.
0.20-0.25mmRegular teaching boards and office boards from 900×1200 to 1200×2400 mmA balance between flatness and rigidity, the mainstream production grade.
0.28-0.35mmLarge sizes above 1200×2400 mm, mobile stand boards, splicing boardsResistant to deformation, no collapse or wobbling after framing, reducing the need for joists.
0.40-0.50mmBlackboards, greenboards, extra-large sizes and special structuresBest rigidity, suitable for heavy loads and large areas.

Why use a Whiteboard-Specific Substrate?

The requirements for the writing surface of the substrate are completely different from those for architectural color-coated steel sheets:

  • There must be no raised zinc bloom. Where zinc bloom is present, the paint film thickness is uneven; this causes the pen tip to “stutter” when writing and makes it easy to leave shallow scratches when erasing, resulting in a finished product that appears uneven.
  • Free of oil, particles, and inclusions. If the substrate is oily, the paint film will develop craters and pinholes; even a single speck of dust trapped under the paint will create a raised spot, rendering the entire roll suitable only for downgraded processing.
  • Must be magnetic. End-user whiteboards require the attachment of magnetic particles, magnetic strips, and magnetic document pouches; aluminum sheets and some laminated steel sheets are not magnetic. Our သွပ်ရည်စိမ်သံမဏိကွိုင် substrate is magnetic.
ဂျီ ကွိုင်

Writing steel plate substrate

အဖြူရောင်စာရေးသံမဏိကွိုင်

White steel coils for writing boards completed

How to select the zinc layer for the substrate

The number after Z indicates the minimum total zinc layer weight for both sides, in g/m², calculated according to GB/T 2518 or JIS G3302, not for one side. Writing Z120 means the total zinc layer weight for both sides is not less than 120 g/m².

Zinc Coating သတ်မှတ်ခြင်း။Total for Both Sidesသက်ဆိုင်သောဖြစ်ရပ်များ
Z60–Z8060–80g/m²Dry indoor environments, short-distance transit
Z120120g / m²Russia’s most popular substrate zinc coating
Z180–Z275180–275g/m²Siberia and the Far East, wintering in port yards, transit without heated warehouses, long-term exposure after cutting

Guide to Choosing Topcoats

Four-Layer Structure

Before we discuss how to choose the right coating, let’s first take a look at the four-layer structure of a paint film. Starting from the substrate, there are at least four layers, each with a different thickness and function.

အလွှာရိုးရိုးခြောက်သွေ့သော ဖလင်အထူfunctions များ
Pretreatment (roughening or chromium-free passivation)အလွန်ပါးလွှာသည်။Provides adhesion and initial corrosion protection
primer5-8μmAdhesion, corrosion protection, and filling of microscopic unevenness in the substrate
အပေါ်ယံကုတ်10-25μmWriting, erasing, solvent resistance, and stain resistance (special topcoat for writing steel plates)
နောက်အင်္ကျီ5-8μmPrevents adhesive penetration and backside rust prevention
ဇယားကွက်အနက်ရောင်သံမဏိကွိုင်
ဇယားကွက်အနက်ရောင်သံမဏိကွိုင်
ဇယားကွက်အနက်ရောင်မျဉ်းကြောင်း အစိမ်းရောင်သံမဏိကွိုင်
ဇယားကွက်အနက်ရောင်မျဉ်းကြောင်း အစိမ်းရောင်သံမဏိကွိုင်

Topcoat Systems

Three topcoat systems are available; select the one based on the intended level of use.

စံနစ်ခဲတံခွန်အားဖြစ်Solvent Resistance and Erasabilityပေးရသင့်လျော်သောဘုတ်အမျိုးအစားများ
Epoxy Whiteboard Paint2H–3HStrong adhesion, good solvent resistance, and consistent erasabilityအလယ်အလတ်Mid-range educational boards and office boards—the best value for the money
UV-Curable Acrylic4H–6HBest smudge resistance, smoothest writing, and best solvent resistanceမြင့်သောClassroom boards for frequent writing and high-end office boards
Standard PolyesterF-HBSolvent resistance and erasability are one level lowerအနိမ့်Low-frequency use, promotional models, and temporary display boards

အကာအကွယ်ရုပ်ရှင်

When it comes to PE and PVC, higher adhesion isn’t always better. Films with adhesion exceeding 400 g/25 mm are likely to peel off with paint when stored in a 40°C shipping container for a month; conversely, if adhesion is too low, the film will curl and attract dust during ocean transport, and the edges will fray by the time the customer cuts the board.

For exports to Russia, the most reliable ranges are: 200–300 g/25 mm for low-temperature-grade PVC and 150–250 g/25 mm for low-temperature-grade PE. The specific low-temperature resistance grade should then be confirmed based on the month of shipment.

မျက်နှာပြင်ကို အကာအကွယ်ဖလင်ဖြင့် ဖုံးအုပ်ထားသည်
မျက်နှာပြင်ကို အကာအကွယ်ဖလင်ဖြင့် ဖုံးအုပ်ထားသည်
သံမဏိကွိုင်များကို PVC ဖလင်ဖြင့် အုပ်ထားသည်
သံမဏိကွိုင်များကို PVC ဖလင်ဖြင့် အုပ်ထားသည်
ပုံစံအထူ180° Peel Strengthအားသာချက်များအန္တရာယ်များ
PE ရုပ်ရှင်40-70μm100–300 g/25 mmLow cost, easy to peel, little adhesive residueModerate conformability; edges lift and pick up dust on long sea voyages
PVC ရုပ်ရှင်60-100μm200–400 g/25 mmStrong bonding; can be printed with logo and grid linesHigh tack may bond to the coating inside a hot container
Low-temperature grade (PE or PVC base)Follows the base film: PE 40–70 / PVC 60–100 μmSame range as the base film, mid-to-high end: PE 150–250 / PVC 200–300 g/25 mmStays flexible at -20 °C / -30 °C and peels cleanly in winterOne price grade higher; must be specified in the order

ကောက်ချက်

When selecting steel coils for Russian whiteboards, the three most important factors are: substrate thickness, paint film thickness, and whether the film can withstand freezing temperatures.

  1. Thickness by board type — Whiteboards: approximately 0.2 mm; blackboards and greenboards: 0.3–0.4 mm; inner diameter: 508 mm.
  2. Coating specifications by system: epoxy paint specifically for whiteboards, with a gloss level of 90+; topcoat 15–25 μm; and backcoat 5–15 μm.
  3. Protective film specifications by season: select a low-temperature-resistant grade and remove it within 3 months.

When evaluating incoming shipments, focus primarily on the three criteria listed above. The remaining parameters can be determined based on specific application requirements and budget.

Wanzhi Steel ပရော်ဖက်ရှင်နယ်ဖြစ်ပါတယ် supplier of writing board steel coils in China. In addition to coils, we also supply pre-cut sheets. We not only export to the Russian market but also serve customers in Argentina, Indonesia, Kazakhstan, the Philippines, Thailand, and other countries. Please contact us for product details and pricing.

Related ထုတ်ကုန်များ

အလားတူစာမူများ